leehughesandClaude Opus 4.5
5554341b49
- Design LoRa packet protocol with CRC16 validation - Add protocol header files (lora_protocol.h, lora_packet.h) - Create battery-powered remote node firmware template - Support for DHT22, BME680, DS18B20 sensors - Deep sleep for battery conservation - Automatic gateway registration - Add LoRa receive to gateway firmware - RadioLib SX1262 integration - Node registry for tracking up to 16 nodes - HTTP forwarding of received readings - ACK responses to remote nodes - Create comprehensive setup guide with wiring diagrams Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
121 lines
3.2 KiB
INI
121 lines
3.2 KiB
INI
; ZNET LoRa Remote Sensor Node
|
|
; Battery-powered sensor nodes for temperature/humidity/VOC monitoring
|
|
;
|
|
; Supported boards:
|
|
; - Heltec WiFi LoRa 32 V3
|
|
; - TTGO LoRa32 (SX1276)
|
|
; - DIY ESP32 + SX1262/SX1276 modules
|
|
|
|
[platformio]
|
|
default_envs = heltec_v3
|
|
|
|
[env]
|
|
platform = espressif32
|
|
framework = arduino
|
|
monitor_speed = 115200
|
|
upload_speed = 921600
|
|
|
|
; Common libraries for all variants
|
|
lib_deps =
|
|
sandeepmistry/LoRa@^0.8.0
|
|
adafruit/Adafruit Unified Sensor@^1.1.14
|
|
adafruit/DHT sensor library@^1.4.6
|
|
adafruit/Adafruit BME680 Library@^2.0.4
|
|
paulstoffregen/OneWire@^2.3.8
|
|
milesburton/DallasTemperature@^3.11.0
|
|
|
|
build_flags =
|
|
-DCORE_DEBUG_LEVEL=1
|
|
-DARDUINO_USB_CDC_ON_BOOT=1
|
|
|
|
; Common settings for battery optimization
|
|
board_build.partitions = min_spiffs.csv
|
|
|
|
; ============================================================================
|
|
; Heltec WiFi LoRa 32 V3 (Recommended - built-in OLED + SX1262)
|
|
; ============================================================================
|
|
[env:heltec_v3]
|
|
board = heltec_wifi_lora_32_V3
|
|
build_flags =
|
|
${env.build_flags}
|
|
-DLORA_BOARD_HELTEC_V3
|
|
-DLORA_FREQUENCY=915.0
|
|
; SX1262 pins for Heltec V3
|
|
-DLORA_SCK=9
|
|
-DLORA_MISO=11
|
|
-DLORA_MOSI=10
|
|
-DLORA_SS=8
|
|
-DLORA_RST=12
|
|
-DLORA_DIO1=14
|
|
-DLORA_BUSY=13
|
|
; OLED pins
|
|
-DOLED_SDA=17
|
|
-DOLED_SCL=18
|
|
-DOLED_RST=21
|
|
; Battery ADC
|
|
-DBATTERY_ADC_PIN=1
|
|
-DBATTERY_ADC_EN_PIN=37
|
|
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
thingpulse/ESP8266 and ESP32 OLED driver for SSD1306 displays@^4.4.0
|
|
jgromes/RadioLib@^6.4.0
|
|
|
|
; ============================================================================
|
|
; TTGO LoRa32 V2.1 (SX1276)
|
|
; ============================================================================
|
|
[env:ttgo_lora32_v21]
|
|
board = ttgo-lora32-v21
|
|
build_flags =
|
|
${env.build_flags}
|
|
-DLORA_BOARD_TTGO_V21
|
|
-DLORA_FREQUENCY=915.0
|
|
; SX1276 pins for TTGO
|
|
-DLORA_SCK=5
|
|
-DLORA_MISO=19
|
|
-DLORA_MOSI=27
|
|
-DLORA_SS=18
|
|
-DLORA_RST=23
|
|
-DLORA_DIO0=26
|
|
; OLED pins
|
|
-DOLED_SDA=21
|
|
-DOLED_SCL=22
|
|
-DOLED_RST=16
|
|
; Battery ADC
|
|
-DBATTERY_ADC_PIN=35
|
|
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
thingpulse/ESP8266 and ESP32 OLED driver for SSD1306 displays@^4.4.0
|
|
|
|
; ============================================================================
|
|
; Generic ESP32 + SX1276 (DIY builds)
|
|
; ============================================================================
|
|
[env:esp32_sx1276]
|
|
board = esp32dev
|
|
build_flags =
|
|
${env.build_flags}
|
|
-DLORA_BOARD_GENERIC
|
|
-DLORA_FREQUENCY=915.0
|
|
; Define your own pins in config.h
|
|
|
|
; ============================================================================
|
|
; DHT22 sensor variant (ambient temp/humidity)
|
|
; ============================================================================
|
|
[env:heltec_v3_dht22]
|
|
extends = env:heltec_v3
|
|
build_flags =
|
|
${env:heltec_v3.build_flags}
|
|
-DSENSOR_TYPE_DHT22
|
|
-DDHT_PIN=7
|
|
|
|
; ============================================================================
|
|
; BME680 sensor variant (temp/humidity/pressure/VOC)
|
|
; ============================================================================
|
|
[env:heltec_v3_bme680]
|
|
extends = env:heltec_v3
|
|
build_flags =
|
|
${env:heltec_v3.build_flags}
|
|
-DSENSOR_TYPE_BME680
|
|
-DBME680_I2C_ADDR=0x76
|